OnePlus 10 Pro Specifications Suggested by Geekbench, China’s 3C Ahead of January Launch 

OnePlus 10 Pro has appeared on Geekbench and China’s 3C sites with model number NE2210. With respect to the other specifications, nothing new. But with respect to the number of threads used in OnePlus 10 Pro, it’s much higher than the previous model. The new benchmark confirms the possibility of using 12 gigabytes of RAM. Rumors about a “bezel-free” smartphone with a maximum of 6.55 inches has also been confirmed by these documents.

All OnePlus 10 Pro Specification From Geekbench and 3C

The information that we have about this benchmark come from the website of Geekbench, one of the world’s largest benchmarks. Geekbench confirms that the OnePlus 10 Pro will be available to buy in the United States starting in January. The most interesting information are those about its appearance on Geekbench. In the previous versions of Geekbench, you could find the information about the appearance of the OnePlus smartphone, but the new website does not display any kind of data.

This page shows just the specifications of the smartphone and not the details that are displayed on the smartphone screen. So, it’s not an official Geekbench for OnePlus 10 Pro but a collection of benchmark results with information about the RAM and the battery. This should not make a lot of difference.

The OnePlus 10 Pro comes with a Qualcomm Snapdragon 855 SoC, like the previous models, with either 6 or 8 gigabytes of RAM.

Both the “10 Pro” and “10 Pro 512GB” models will be available. The “10 Pro” version will have 8GB of RAM while the “10 Pro 512GB” version will have 6GB of RAM. OnePlus 10 Pro 512GB model: $ 1,500.00

10 Pro model: $ 1,500.00

The OnePlus 10 Pro will be available in three colors: Red, Midnight Black and Blue.

OnePlus 10 Pro Specs Based on Geekbench

Screen: 6.55 inches Full HD+ IPS

6.55 inches Full HD+ IPS Resolution: 1440 x 3120 pixels

1440 x 3120 pixels Storage: 128GB / 256GB / 512GB

128GB / 256GB / 512GB Battery: 4,500 mAh

4,500 mAh Charging: Dash Charge 3.0 or Warp Charge 30t

Dash Charge 3.0 or Warp Charge 30t Release date: January 24th

For other specs, we just give some data based on a benchmark for a benchmark.

Other Specs Based on the Geekbench

1 x USB-C port

1 x Type-C HDMI port

1 x USB-A port

1 x Headphone port

3.5mm headphone jack

Microphone

Wi-Fi

Bluetooth

GPS

Accelerometer

USB-A to USB-C cable

SIM-card tray

Camera: Dual-Camera with 8 megapixel (wide angle) + 12 megapixel (telephoto)

Dual-Camera with 8 megapixel (wide angle) + 12 megapixel (telephoto) Dimensions: 160.2 x 74.5 x 7.9mm

160.2 x 74.5 x 7.9mm Weight: 168 grams

The OnePlus 10 Pro, based on the Geekbench information, will not have a notch. It will have a bezel-free design and a 6.55-inch display with an aspect ratio of 2:1. This means that the OnePlus 10 Pro will be 0.1-inch wider and 0.1-inch shorter than the iPhone 11 Pro Max. If you remove the “pro” tag, this will be the same as the OnePlus 7T.

The OnePlus 10 Pro will also support an in-display fingerprint scanner. However, its type is unknown. Although the previous information of the smartphone did not talk about this, we still think that it will be possible to activate the device without removing it from the case.

The next Geekbench benchmark includes some new specifications. It also confirms that the OnePlus 10 Pro will use USB-C and will include a camera with a resolution of 5 megapixels.

OnePlus 10 Pro, According to 3C

We also found another document, apparently from China’s 3C. The 3C benchmark that was found on one of the websites used on these documents reveals information about the appearance of the smartphone.

Not many details of the new smartphone are available. The only information that we have is a full display of the OnePlus 10 Pro and the resolution of 1440 x 3120 pixels. It also confirms that the OnePlus 10 Pro will have a 6.55-inch display.

What’s interesting is that the smartphone will have a maximum RAM of 12 gigabytes. Even though.